PENELOPE - Bikini top in sandy breeze print

TOPS

MARINA

The Marina top is a very comfortable bandeau top. It provides good support, especially with the removable shoulder straps. These can be placed on the shoulders or around the neck for a different support. It is a bikini top that can go up to an F cup. This top also comes with removable foam cups.

Measure the circumference under your bust to find the perfect size for you.

GABRIELLE

The Gabrielle top has a similar feeling to that of a sports bra. It is great for busty women as it supports well, leaving a visible cleavage without flattening the breasts. This item does not come with foam cups. We sometimes suggest ordering a smaller size to create that well-supported effect.

Measure the circumference under your bust to find the perfect size for you.

ROXANNE

The Roxanne top is like many other triangle top, best for small to medium chested women. All straps have elastic insertion and comes with removable foam cups.

Measure your bust circumference to find the right size for you.

SANDRA

The Sandra top is a very comfortable swimsuit for any movement. It provides good support but not enough for large bust. It covers a large area of the chest to allow you to perform a wide range of motions.

Since there is adjustment possibilities under the chest, it is important to choose the size according to the width of your breasts. A big and narrow breast as an A or B cup can fit in the Small size. However, if you have a wider breast as a C or D cup, we recommend to go with larger sizes to totally cover the side of your breast.

It is also important to measure your under bust circumference.

PENELOPE

The Penelope bralette provides good support,  thanks to the elastic band inserted into the straps. It comes with removable foam cups, adjustable shoulder straps and an inch of adjustable under bust band.

You must measure your under bust circumference.

LOLA

The Lola top is more of a beach bunny type bikini. It needs good adjustments to fit perfectly but is not the best for water sports. This model is made a little bit smaller than others so you really have to look at your under bust measurement to find the perfect size. It’s a bikini top that can go up to a D cup. This top also comes with removable foam cups.

Measure your under bust circumference to find the right size for you.

BOTTOMS

ERICA

The Erica model is a low rise sporty bottom with a more revealing look. The cut is called “half-moon” because it shows half of the butt cheeks. Fits all sizes.

Measure your big hips circumference to find the perfect size.

CHLOE

The Chloe bottom is a low rise swimsuit with laced sides. Same cut as the erica bottom, called “half-moon” because it shows half of the butt cheeks. Perfect for multiple activities because of the adjustable lacing. Fits all sizes.

Measure your big hips circumference to find the perfect size.

REBECCA

The Rebecca bottom is a low rise swimsuit with laced sides. Has a fuller butt coverage. Perfect for multiple activities because of the adjustable lacing. Fits all sizes.

Measure your big hips circumference to find the perfect size.

FLORENCE

The Florence high waist design is based on the same cut as Erica, revealing half of the butt cheeks, this model rises slightly higher than the belly button, holding tight to the waist.

It is important to measure your big hip size to see if they will pass through the waist line.

ANALIE

The Analie high waist bottom has an indented cut. Having a full butt coverage, this model rises slightly higher than the belly button, holding tight to the waist.

It is important to measure your big hip size to see if they will pass through the waist line.

VIKTORIA

The Viktoria panty is adjustable on both sides. Ideal for smaller bottoms, the circumference that should be measured is the big hips.

ONE PIECE

GISÈLE

This one piece is the perfect mix of modesty and exposure. The indented hips elongate the legs and the lower back reflects sensuality and elegance. The shoulder straps are adjustable.

It is important to know the length of your torso by measuring from one shoulder to the back of it going in between the legs.

MICHELLE

This one piece is the perfect fit for a majority of shapes. Cheeky cut, with a low cut back design, it has the most bust support than all the one pieces because of the under-bust elastic tighten to you convenience by the straps. Also the only one piece that comes with removable foam cups.

It is important to know the length of your torso by measuring from one shoulder to the back of it going in between the legs, but also your big hips circumference. 

SASHA

This one piece reveals just enough at the right place. Giving side boob effect with a beautiful low cut back, it fully covers the butt. The shoulder straps are adjustable but also movable from straight to crossed. 

It is important to know the length of your torso by measuring from one shoulder to the back of it going in between the legs, but also your big hips circumference.

 

Are you unsure about the size that you should choose?
Or, you don’t know which model would fit you the best?

Send us your measurements at info@selfishswimwear.com as explained in the size chart, with a photo if necessary and we will advise you the best we can.

The high end recycled fabrics we use is made of ECONYL® yarn. A 100% regenerated nylon yarn derived from pre and post industrial waste such as discarded fishing nets, carpet fluff (the top part of Nylon carpets which have got to the end of their useful life), tulle etc.: all such materials, once they have reached the end of their useful life, instead of being disposed of in the landfill, are recovered and regenerated.

Thus, the fishing nets recovered, together with some other materials ( carpet fluff, tulle etc. ) are delivered to Aquafil SpA regeneration plant where, thanks to a sophisticated and complex chemical-physical process, the above mentioned materials are turned into ECONYL®, a new polyamide yarn boasting the same features as virgin nylon in terms of performance and quality, but with the plus of not having been produced with the use of non renewable fossil raw materials. ECONYL® Regeneration System!

Furthermore, we are really proud to collaborate with this company that has as their main commitment the preserving of nature, a new challenge they have enthusiastically embraced and which they intend to win by applying a structured ethical code which can be summarized as follows:

1. Optimizing production processes by introducing cutting-edge technologies to monitor and reduce waste and polluting residuals.

2. Certifying, by means of clear data, the environmental results achieved.

3.  Showing a real interest in research and in the use of new sustainable raw materials, such as recycled yarns.

4. Supporting important international projects aimed at safeguarding our environment.

5. Contributing to the social and financial development of local communities.

6. Spreading awareness among our employees and customers so that they can be more respectful of the environment.